He says the chief feature of the
modern dinghy is her extreme lightness.
She loses way in a moment and picks it up again equally quickly. “She
can only be handled by rapid and considerable helm movements capable of putting
her about before a sea stops her, or of keeping her moving by a process of
weaving through seas which she lacks the power to trample down.”
But that situation is reversed in a
bigger, ballasted yacht, says the author. “The most effective way of applying
the brake is to swing the yacht abruptly from one course to another.”
Why should this be? Well, think
about what happens when you turn the rudder. “The fact that the rudder is put
over to a certain angle when altering course creates a little resistance, but
that of the rudder alone is a trifle. The effect of the rudder is to give the
whole hull a sheer or angle of yaw — it is analogous to the angle of leeway
when sailing to windward. The whole yacht, in fact, starts moving obliquely.
The water pressure set up on the hull thereby, and not the rudder, is what
ultimately turns the yacht.”
It’s obvious that this sideslipping
through the water must entail a large increase in resistance to forward
movement. Phillips-Birt estimates it’s
something like an additional 10 percent for each degree of yaw established.
“So, when a few spokes of the wheel
are applied, the head swings this way or that only because the hull has first
been set into an oblique manner of advance, which is very much more resistful
than advance straight ahead.
“You pay a great deal in added
resistance for a few degrees of luffing up or bearing away.”
Every time the helm is moved, he
adds— easy though the movement may seem, and harmless — it initiates a train of
events introducing far bigger forces than those applied by the helmsman, and
these tend to stop the ship. “The best helmsman,” he concludes, “is the one who
does not seem to be steering.”
Today’s
Thought
We
spend our lives in learning pilotage,And grow good steersmen when the vessel’s crank!
— George Meredith, The Wisdom of Eld
Tailpiece
“The tolerances in this engine are
very fine — we aim at no more than three thousands of an inch.”“Wow! How many thousands are there in an inch?”
“Gee, feller, I dunno. There must be millions of them.”
(Drop by every Monday, Wednesday,
Friday for a new Mainly about Boats column.)
John, unfortunately many of us that started as dinghy sailors learn this the hard way the first time we park a large yacht into a small slip after making a 90 degree turn too late.
ReplyDeleteMy first lesson only cost me approximately $1000 on both my charter boat and the other poor guy's power cat.
ReplyDelete